Toolbars

This section describes the various icons available in the 3 Axis Surface Machining workbench.

The toolbars

• Machining Operations,

• Tool Path Editor,

• Probing Operations,

• Machining Feature,

• Geometry Management,

• Minimum Tool Length,

are describeb below. When a toolbar contains icons belonging to another machining workbench, only the icon belonging to 3 Axis Surface Machining is described.

Information is also available by clicking on the links below:

• Manufacturing Program Toolbar

• Auxiliary Operations Toolbar

• NC Output Management Toolbar

• Machining Process

• Manufacturing Program Optimization

• Edge Selection Toolbar

• Face Selection Toolbar

Machining Operations Toolbar

	See Roughing Operations sub-toolbar below
	See Sweeping Operation sub-toolbar below
	Pencil See Inserting Pencil Operations
	ZLevel See ZLevel Machining
	See Countour Operations sub-toolbar below
	Spiral Milling See Spiral Milling
	Profile Contouring
	See Axial machining operations sub-toolbar.

Roughing Operations Sub-toolbar

	Roughing See Roughing
	Sweep Roughing See Sweep Roughing
	Plunge Milling See Plunge Milling

Sweeping Operations Sub-toolbar

	Sweeping See Sweeping
	4-Axis Curve Sweeping See Creating a 4-Axis Curve Sweeping Operation

Contour-Driven Operations Sub-toolbar

	Contour-driven See Contour-Driven Machining
	Isoparametric Machining See Isoparametric Machining

Tool Path Editor Toolbar

	Edit Tool Path See Editing Tool Paths
	Split on Collision Points See Splitting on Collision Points
	Check Tool Length See Checking Tool Holder Collision
	Create Geometries See Creating Geometries

Machining Feature Toolbar

	Geometrical Zones See Using Geometrical Zones
	Machining/Slope Area See Defining an area to machine
	Rework Area See Defining an area to rework
	Offset Group See Creating Offset Groups
	See Machining Features Sub-toolbar below
	Manufacturing View See the use of Machining feature views with machining areas.

Geometry Management Toolbar

	Creates rough stock See Creating an Automatic Rough Stock
	Inserts an STL file See Reading STL files
	Creates a stock by offset Ssee Creating an Offset on Part
	Points Creation Wizard See Creating Points and Lines with the Wizards
	Limit Lines Projection Wizard See Creating Points and Lines with the Wizards
	Limit Lines Creation Wizard see Creating Points and Lines with the Wizards

Minimum Tool Length

Compute Tool Gage on Assembly see Computing the Tool Gage