 |
-
Click Point Analysis Interface
in the Analysis Supports toolbar.
The Point Analysis Interface dialog box appears.

- Name: lets you change the name of the connection.
- First component: lets you select a point, a vertex
or a set of geometrical points.
Do not select points that are already associated to a mesh node.
- Mesh Parts: lets you select the associated mesh
part.
The mesh part selection is mandatory. If you do not select any mesh
part, a warning message appears after launching the update
operation.
|
-
Select points as First component.
In this particular example, select six geometrical
points.
You can select in the specification tree: Point.1,
Point.2, Point.3, Point.4, Point.5
and Point.6.
 |
-
Activate the first Mesh Parts field.
-
Select the desired mesh part.
In this particular example, select the Surface
Mesh.1 mesh part in the specification tree. |
-
Click OK in the Point Analysis Interface
dialog box.
Point Analysis Interface.1 appears in the
specification tree under the Analysis Connection Manager.1
set.
 |
|