Corner See Creating Corners (Both Elements Trimmed) |
|
Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Extended Toolbar (Extended Toolbar 1). | |
See Creating Chamfers with Both Elements Trimmed | |
Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Extended Toolbar (Extended Toolbar 2). | |
See Relimitations Sub-toolbar below | |
Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Extended Toolbar (Extended Toolbar 3). | |
See Transformation Sub-toolbar below | |
See 3D Geometry Sub-toolbar below |
Trim See Trimming Elements Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Extended Toolbar (Extended Toolbar 3). |
|
Break See Breaking Elements |
|
Quick Trim See Breaking and Trimming |
|
Close See Closing Elements |
|
Complement See Complementing an Arc |
Mirror See Creating Mirrored Elements |
|
Symmetry See Moving Elements by Symmetry |
|
Translate See Translating Elements |
|
Rotate See Rotating Elements |
|
Scale See Scaling Elements |
|
Offset See Offsetting Elements Clicking this icon displays additional icons in the Sketch Tools toolbar. For information, see Sketch Tools Toolbar (Extended Toolbar 5). |
Project 3D Elements See Projecting 3D Elements onto the Sketch Plane |
|
Intersect 3D Elements See Intersecting 3D Elements with the Sketch Plane |
|
Project 3D Silhouette Edges See Projecting 3D Silhouette Edges |
The Sketch Tools toolbar displays additional icons if you select a certain number of capabilities available from the Operation Toolbar.
Trim All Elements See Creating Corners |
|
Trim First Element See Creating Corners (One Element Trimmed) |
|
No Trim See Creating Corners (No Element Trimmed) |
|
Standard Lines Trim See Creating Corners (Standard Lines Trim) |
|
Construction Lines Trim See Creating Corners (Construction Lines Trim) |
|
Construction Lines No Trim See Creating Corners (Construction Lines Not Trimmed) |
Trim All Elements See Creating Chamfers with Both Elements Trimmed |
|
Trim First Element See Creating chamfers with One Element Trimmed |
|
No Trim See Creating Chamfers with No Element Trimmed |
|
Standard Lines Trim See Creating Chamfer with Standard Lines Trimmed |
|
Construction Lines Trim See Creating Chamfer with Construction Lines Trimmed |
|
Construction Lines No Trim See Creating Chamfers (Construction Lines Not trimmed) |
Trim All Elements See Trimming Elements and Trimming Multiple Elements |
|
Trim First Element See Trimming One Element |
Break and Rubber In See Breaking and Trimming |
|
Break and Rubber Out See Breaking and Trimming |
|
Break and Keep See Breaking and Trimming |
No Propagation See Offsetting Elements |
|
Tangent Propagation See Offsetting Elements |
|
Point Propagation See Offsetting Elements |
|
Both Side Offset See Offsetting Elements |