Using the Compass to Manipulate Connectors

	This task shows you how to use the compass to manipulate connectors placed on resolved parts.
	You can use the compass to manipulate connectors placed on resolved parts only. Use this method when adding a new connector, or by using the Modify command. Both are explained below.
	1.	To manipulate while adding a connector, drag the compass and place it over the connector while the Define Plane box is displayed.
	2.	To manipulate using the Modify command, select the resource, click the Manage Connectors button and, in the Manage Connectors dialog box, select the connector in the connectors list. Click the Modify button.
	3.	The Modify Connectors box will display. You can now drag the compass and place it over the connector.
	4.	Click on one of the handles on the compass and manipulate the connector to the desired position.  You can change alignment, orientation and origin using the compass.
	5.	Click OK on the Modify Connector  or the Define Plane dialog box when done.  Remove the compass from the connector by dragging it to the axis.