Changing the Angle of a Segment

	This task shows you how to change the angle of a path reservation, boundary, or run segment.
	1.	Place your cursor over the element and click the right mouse button.
	2.	From the pull-down menu, select the element you want to modify and select the `Definition` option. The Definition dialog box is displayed.
	3.	Place the cursor over the support line for that element and click the right mouse button.
	4.	Select `Definition` from the pop-menu. The Segment Definition dialog box is displayed.
	5.	Specify a new value for the Turn Angle. A line is displayed in the drawing to show the new position for the segment.
	6.	Click `OK` on the Segment Definition dialog box.
	7.	Click `OK` on the Definition dialog box to complete the change.
	8.	To align a section's normal with the compass Z axis: Bring up the Definition box for the section. Place the compass on a 3D element and adjust the Z axis to the angle you want. Right click on the segment. A pop-up menu will show. Click on `Rotate section to compass Z direction`. The normal of the section will rotate to align with the Z axis, as shown in the image below.