Tool and Insert Holder Resources
All Tool and Insert-holder resources for Mill, Drill and Turn
operations are presented in this section:
MfgDrillTool (Drill)
Description
Describes the MfgDrillTool resource attributes that are available in Machining
workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type:
String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type:
Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type:
Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_CUT_ANGLE (Cutting angle : A)
Type:
Real
Defines the cutting angle of the tool. The manufacturing
attribute is MFG_CUT_ANGLE. |
MFG_TL_TIP_LGTH (Tool tip length : ld)
Type: Real
Defines the part of the tool that cannot be used for cutting
material at the correct diameter (non-functional part of
the tool). The manufacturing attribute is MFG_TL_TIP_LGTH.
|
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_TOOTH_MAT (Tooth material)
Type:
String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type:
String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type:
Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type:
Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type:
Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgTapTool (Tap)
Description
Describes the MfgTapTool resource attributes that are available in Machining
workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type:
String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type:
Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_LENGTH_NOM_DIAM (Nominal diam. location)
Type: Real
Specifies where the nominal diameter is measured. The manufacturing
attribute is MFG_LENGTH_NOM_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type:: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type:
Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type:
Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type:
Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_ENTRY_DIAM (Entry diameter : d)
Type:
Real
Defines the smallest diameter of the head of the tool. The
manufacturing attribute is MFG_ENTRY_DIAM. |
MFG_TL_TIP_LGTH (Tool tip length : ld)
Type:
Real
Defines the part of the tool that cannot be used for cutting
material at the correct diameter (non-functional part of
the tool). The manufacturing attribute is MFG_TL_TIP_LGTH.
|
MFG_TAPER_ANGLE (Taper
angle : Ach)
Type:
Real
Defines the taper angle on the tool. The manufacturing attribute
is MFG_TAPER_ANGLE. |
MFG_NOMINAL_DIAM (Nominal diameter location : Lnd)
Type: Real
Defines where the nominal diameter of the tool is measured
from. The manufacturing attribute is MFG_NOMINAL_DIAM.
|
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type:
String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_TOOTH_MAT (Tooth material)
Type:
String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type:
String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_THREAD_FORM (Thread form)
Type:
String
Possible values:
METRIC (Metric)
INCH (Inch)
OTHER (Other)
Defines the standard of the thread used on a tap. The manufacturing
attribute is MFG_THREAD_FORM with possible value METRIC,
INCH or OTHER. |
MFG_THREAD_CLASS (Thread class)
Type: String
Possible values:
1B
2B
3B
5H
6H
7H
OTHER (Other)
Defines the dimensional tolerances of the thread and can
take the following values: 1B (consistent with INCH thread
form), 2B (consistent with INCH thread form), 3B (consistent
with INCH thread form), 5H (consistent with METRIC thread
form), 6H (consistent with METRIC thread form), 7H (consistent
with METRIC thread form), OTHER The manufacturing attribute
is MFG_THREAD_CLASS. |
MFG_THD_FRM_DESC (Thread form desc.)
Type: String
Specifies the thread form as a comment. For example, it
could be some other thread form like Round thread. The manufacturing
attribute is MFG_THD_FRM_DESC. |
MFG_THD_CLS_DESC (Thread class desc.)
Type: String
Specifies the thread class as a comment. The manufacturing
attribute is MFG_THD_CLS_DESC. |
MFG_PITCH_OF_THREAD (Pitch of thread)
Type: Real
Describes the thread pitch. The manufacturing attribute
is MFG_PITCH_OF_THREAD. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type:
String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type:
String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type:
Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type:
Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type:
Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgThreadMillTool (Thread Mill)
Description
Describes the MfgThreadMillTool resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_ENTRY_DIAM (Entry diameter : d)
Type: Real
Defines the smallest diameter at the head of the tool. The
manufacturing attribute is MFG_ENTRY_DIAM. |
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_OUTSIDE_DIAM (Outside diameter : Da)
Type: Real
Defines the diameter of the external envelope of the tool's
active part for tools such as face mills, countersinks and
thread mills. The manufacturing attribute is MFG_OUTSIDE_DIAM.
|
MFG_LENGTH_1 (Length 1 : l1)
Type: Real
Defines the length of the first active part for tools such
as multi-diameter tool, bore-and-chamfer tool and thread
mill. The manufacturing attribute is MFG_LENGTH_1. |
MFG_CHAMFER_ANGLE (Chamfer angle : Ac)
Type: Real
Defines the chamfer angle on the tool. The manufacturing
attribute is MFG_CHAMFER_ANGLE. |
MFG_TAPER_ANGLE (Taper angle : Ach)
Type: Real
Defines the taper angle on the tool. The manufacturing attribute
is MFG_TAPER_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_THREAD_FORM (Thread form)
Type: String
Possible values:
METRIC (Metric)
INCH (Inch)
OTHER (Other)
Defines the standard of the thread used on a tap. The manufacturing
attribute is MFG_THREAD_FORM with possible value METRIC,
INCH or OTHER. |
MFG_THREAD_CLASS (Thread class)
Type: String
Possible values:
1B
2B
3B
5H
6H
7H
OTHER (Other)
Defines the dimensional tolerances of the thread and can
take the following values: 1B (consistent with INCH thread
form), 2B (consistent with INCH thread form), 3B (consistent
with INCH thread form), 5H (consistent with METRIC thread
form), 6H (consistent with METRIC thread form), 7H (consistent
with METRIC thread form), OTHER The manufacturing attribute
is MFG_THREAD_CLASS. |
MFG_THD_FRM_DESC (Thread form desc.)
Type: String
Specifies the thread form as a comment. For example, it
could be some other thread form like Round thread. The manufacturing
attribute is MFG_THD_FRM_DESC. |
MFG_THD_CLS_DESC (Thread class desc.)
Type: String
Specifies the thread class as a comment. The manufacturing
attribute is MFG_THD_CLS_DESC. |
MFG_PITCH_OF_THREAD (Pitch of thread)
Type: Real
Describes the thread pitch. The manufacturing attribute
is MFG_PITCH_OF_THREAD. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type:
Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type:
Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type:
Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgCountersinkTool (Countersink)
Description
Describes the MfgCountersinkTool resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_CORNER_RAD (Corner radius : Rc)
Type: Real
Defines the radius of the cutting shape of the tool. The
manufacturing attribute is MFG_CORNER_RAD. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_ENTRY_DIAM (Entry diameter : d)
Type: Real
Defines the smallest diameter of the head of the tool. The
manufacturing attribute is MFG_ENTRY_DIAM. |
MFG_OUTSIDE_DIAM (Outside diameter : Da)
Type: Real
Defines the diameter of the external envelope of the tool's
active part for tools such as face mills, countersinks and
thread mills. The manufacturing attribute is MFG_OUTSIDE_DIAM.
|
MFG_CUT_ANGLE (Cutting angle : A)
Type: Real
Defines the cutting angle of the tool. The manufacturing
attribute is MFG_CUT_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type:
Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type:
Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type:
Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgReamerTool (Reamer)
Description
Describes the MfgReamerTool resource attributes that are available in Machining
workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type:
String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type:
Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_ENTRY_DIAM (Entry diameter : d)
Type: Real
Defines the smallest diameter of the head of the tool. The
manufacturing attribute is MFG_ENTRY_DIAM. |
MFG_TL_TIP_LGTH (Tool tip length : ld)
Type: Real
Defines the part of the tool that cannot be used for cutting
material at the correct diameter (non-functional part of
the tool). The manufacturing attribute is MFG_TL_TIP_LGTH.
|
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type:
Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type:
Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type:
Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgSpotDrillTool (Spot Drill)
Description
Describes the MfgSpotDrillTool resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_CUT_ANGLE (Cutting angle : A)
Type: Real
Defines the cutting angle of the tool. The manufacturing
attribute is MFG_CUT_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type:
Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type:
Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type:
Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgCenterDrillTool (Center Drill)
Description
Describes the MfgCenterDrillTool resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_CUT_ANGLE (Cutting angle : A)
Type: Real
Defines the cutting angle of the tool. The manufacturing
attribute is MFG_CUT_ANGLE. |
MFG_TAPER_ANGLE (Taper angle : Ach)
Type: Real
Defines the taper angle on the tool. The manufacturing attribute
is MFG_TAPER_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type:
Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type:
Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type:
Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgMultiDiamDrillTool (Multi Diameter Drill)
Description
Describes the MfgMultiDiamDrillTool resource attributes that are available
in Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
MFG_NB_OF_STAGES (Number of stages)
Type: Integer
Defines the number of stages of a multi-diameter drill.
The manufacturing attribute is MFG_NB_OF_STAGES. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_CUT_ANGLE (Cutting angle : A)
Type: Real
Defines the cutting angle of the tool. The manufacturing
attribute is MFG_CUT_ANGLE. |
MFG_TL_TIP_LGTH (Tool tip length : ld)
Type: Real
Defines the part of the tool that cannot be used for cutting
material at the correct diameter (non-functional part of
the tool). The manufacturing attribute is MFG_TL_TIP_LGTH.
|
MFG_CHAMFR_DIAM1 (Chamfer diameter 1 : d1)
Type: Real
Defines the diameter of the second part of a multi-diameter
tool or bore-and-chamfer tool. The manufacturing attribute
is MFG_CHAMFR_DIAM1. |
MFG_LENGTH_1 (Length 1 : l1)
Type: Real
Defines the length of the first active part for tools such
as multi-diameter tool, bore-and-chamfer tool and thread
mill. The manufacturing attribute is MFG_LENGTH_1. |
MFG_TAPER_ANGLE (Taper angle : Ach)
Type: Real
Defines the taper angle on the tool. The manufacturing attribute
is MFG_TAPER_ANGLE. |
MFG_CHAMFR_DIAM2 (Chamfer diameter 2 : d2)
Type: Real
Defines the diameter of the third active part of a multi-diameter
tool. The manufacturing attribute is MFG_CHAMFR_DIAM2.
|
MFG_LENGTH_2 (Length 2 : l2)
Type: Real
Defines the length of the second active part of a multi-diameter
tool. The manufacturing attribute is MFG_LENGTH_2. |
MFG_ANGLE2 (Cutting angle 2 : A2)
Type: Real
Defines the second cutting angle of the active part of a
multi-diameter tool or two-sides chamfering tool. The manufacturing
attribute is MFG_ANGLE2. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type: Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type: Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type: Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgBoringAndChamferingTool (Boring and Chamfering Tool)
Description
Describes the MfgBoringAndChamferingTool resource attributes that are available
in Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_CORNER_RAD (Corner radius : Rc)
Type: Real
Defines the radius of the cutting shape of the tool. The
manufacturing attribute is MFG_CORNER_RAD. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_CHAMFR_DIAM1 (Chamfer diameter 1 : d1)
Type: Real
Defines the diameter of the second part of a multi-diameter
tool or bore-and-chamfer tool. The manufacturing attribute
is MFG_CHAMFR_DIAM1. |
MFG_LENGTH_1 (Length 1 : l1)
Type: Real
Defines the length of the first active part for tools such
as multi-diameter tool, bore-and-chamfer tool and thread
mill. The manufacturing attribute is MFG_LENGTH_1. |
MFG_TAPER_ANGLE (Taper angle : Ach)
Type: Real
Defines the taper angle on the tool. The manufacturing attribute
is MFG_TAPER_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type: Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type: Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type: Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgTwoSidesChamferingTool (Two Sides Chamfering Tool)
Description
Describes the MfgTwoSidesChamferingTool resource attributes that are available
in Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_ENTRY_DIAM (Entry diameter : d)
Type: Real
Defines the smallest diameter of the head of the tool. The
manufacturing attribute is MFG_ENTRY_DIAM. |
MFG_CUT_ANGLE (Cutting angle : A)
Type: Real
Defines the cutting angle of the tool. The manufacturing
attribute is MFG_CUT_ANGLE. |
MFG_TL_TIP_LGTH (Tool tip length : ld)
Type: Real
Defines the part of the tool that cannot be used for cutting
material at the correct diameter (non-functional part of
the tool). The manufacturing attribute is MFG_TL_TIP_LGTH.
|
MFG_ANGLE2 (Cutting angle 2 : A2)
Type: Real
Defines the second cutting angle of the active part of a
multi-diameter tool or two-sides chamfering tool. The manufacturing
attribute is MFG_ANGLE2. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type: Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type: Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type: Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgCounterboreMillTool (Counterbore Mill)
Description
Describes the MfgCounterboreMillTool resource attributes that are available
in Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_ENTRY_DIAM (Entry diameter : d)
Type: Real
Defines the smallest diameter of the head of the tool. The
manufacturing attribute is MFG_ENTRY_DIAM. |
MFG_TL_TIP_LGTH (Tool tip length : ld)
Type: Real
Defines the part of the tool that cannot be used for cutting
material at the correct diameter (non-functional part of
the tool). The manufacturing attribute is MFG_TL_TIP_LGTH.
|
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_COMPOSITION (Composition)
Type: String
Possible values:
ONE_PIECE (One piece)
INSERT_HOLDER (Insert holder)
Specifies if the tool is an inserted one. The manufacturing
attribute is MFG_COMPOSITION with possible value ONE_PIECE
or INSERT_HOLDER. |
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_PLNG_ANG (Max plunge angle)
Type: Real
Defines the plunge ability of the tool. When the tool is
able to plunge along its axis, the maximum plunge angle
is equal to 90 degrees. The manufacturing attribute is MFG_MAX_PLNG_ANG.
|
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type: Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type: Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type: Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |
MfgEndMillTool (End Mill)
Description
Describes the MfgEndMillTool resource attributes that are available in Machining
workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type:
String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
MFG_BALL_TYPE (Ball-end tool)
Type: Boolean (Yes/No)
Defines the tool as being ball-end. The manufacturing attribute
is MFG_BALL_TYPE. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_CORNER_RAD (Corner radius : Rc)
Type: Real
Defines the radius of the cutting shape of the tool. The
manufacturing attribute is MFG_CORNER_RAD. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type:
Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_TOOL_CORE_DIAMETER (Non cutting diameter)
Type: Real
Defines the diameter of the non-cutting part (core) of the
tool. This can be useful in operations such as Roughing,
Pocketing, and Multi-Axis Helix Machining. The manufacturing
attribute is MFG_TOOL_CORE_DIAMETER. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_COMPOSITION (Composition)
Type: String
Possible values:
ONE_PIECE (One piece)
INSERT_HOLDER (Insert holder)
Specifies if the tool is an inserted one. The manufacturing
attribute is MFG_COMPOSITION with possible value ONE_PIECE
or INSERT_HOLDER. |
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DESC (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DESC. |
MFG_TOOTH_MATDESC (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDESC. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_PLNG_ANG (Max plunge angle)
Type: Real
Defines the plunge ability of the tool. When the tool is
able to plunge along its axis, the maximum plunge angle
is equal to 90 degrees. The manufacturing attribute is MFG_MAX_PLNG_ANG.
|
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH (Finishing cutting speed)
Type: Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH (Finishing feedrate per tooth)
Type: Real
Defines the Finishing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_FINISH. |
MFG_AA_FINISH (Axial depth of cut for finish)
Type: Real
Defines the Axial depth of cut for finish of the tool. The
manufacturing attribute is MFG_AA_FINISH. |
MFG_AR_FINISH (Radial depth of cut for finish)
Type: Real
Defines the Radial depth of cut for finish of the tool.
The manufacturing attribute is MFG_AR_FINISH. |
MFG_VC_ROUGH (Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH (Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_ROUGH. |
MFG_AA_ROUGH (Axial depth of cut for rough)
Type: Real
Defines the Axial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AA_ROUGH. |
MFG_AR_ROUGH (Radial depth of cut for rough)
Type: Real
Defines the Radial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AR_ROUGH. |
MfgFaceMillTool (Face Mill)
Description
Describes the MfgFaceMillTool resource attributes that are available in Machining
workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_CORNER_RAD (Corner radius : Rc)
Type: Real
Defines the radius of the cutting shape of the tool. The
manufacturing attribute is MFG_CORNER_RAD. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type:
Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_OUTSIDE_DIAM (Outside diameter : Da)
Type: Real
Defines the diameter of the external envelope of the tool's
active part for tools such as face mills, countersinks and
thread mills. The manufacturing attribute is MFG_OUTSIDE_DIAM.
|
MFG_CUT_ANGLE (Cutting angle : A)
Type: Real
Defines the cutting angle of the tool. The manufacturing
attribute is MFG_CUT_ANGLE. |
MFG_TOOL_CORE_DIAMETER
(Non cutting diameter)
Type: Real
Defines the diameter of the non-cutting part (core) of the
tool. This can be useful in operations such as Roughing,
Pocketing, and Multi-Axis Helix Machining. The manufacturing
attribute is MFG_TOOL_CORE_DIAMETER. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_COMPOSITION (Composition)
Type: String
Possible values:
ONE_PIECE (One piece)
INSERT_HOLDER (Insert holder)
Specifies if the tool is an inserted one. The manufacturing
attribute is MFG_COMPOSITION with possible value ONE_PIECE
or INSERT_HOLDER. |
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_PLNG_ANG (Max plunge angle)
Type: Integer
Defines the plunge ability of the tool. When the tool is
able to plunge along its axis, the maximum plunge angle
is equal to 90 degrees. The manufacturing attribute is MFG_MAX_PLNG_ANG.
|
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH (Finishing cutting speed)
Type: Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH (Finishing feedrate per tooth)
Type: Real
Defines the Finishing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_FINISH. |
MFG_AA_FINISH (Axial depth of cut for finish)
Type: Real
Defines the Axial depth of cut for finish of the tool. The
manufacturing attribute is MFG_AA_FINISH. |
MFG_AR_FINISH (Radial depth of cut for finish)
Type: Real
Defines the Radial depth of cut for finish of the tool.
The manufacturing attribute is MFG_AR_FINISH. |
MFG_VC_ROUGH (Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH (Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_ROUGH. |
MFG_AA_ROUGH (Axial depth of cut for rough)
Type: Real
Defines the Axial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AA_ROUGH. |
MFG_AR_ROUGH (Radial depth of cut for rough)
Type: Real
Defines the Radial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AR_ROUGH. |
MfgConicalMillTool (Conical Mill)
Description
Describes the MfgConicalMillTool resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
MFG_BALL_TYPE (Ball-end tool)
Type: Boolean (Yes/No)
Defines the tool as being ball-end. The manufacturing attribute
is MFG_BALL_TYPE. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_CORNER_RAD (Corner radius : Rc)
Type: Real
Defines the radius of the cutting shape of the tool. The
manufacturing attribute is MFG_CORNER_RAD. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_ENTRY_DIAM (Entry diameter : d)
Type: Real
Defines the smallest diameter of the head of the tool. The
manufacturing attribute is MFG_ENTRY_DIAM. |
MFG_CUT_ANGLE (Cutting angle : A)
Type: Real
Defines the cutting angle of the tool. The manufacturing
attribute is MFG_CUT_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_COMPOSITION (Composition)
Type: String
Possible values:
ONE_PIECE (One piece)
INSERT_HOLDER (Insert holder)
Specifies if the tool is an inserted one. The manufacturing
attribute is MFG_COMPOSITION with possible value ONE_PIECE
or INSERT_HOLDER. |
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_PLNG_ANG (Max plunge angle)
Type: Real
Defines the plunge ability of the tool. When the tool is
able to plunge along its axis, the maximum plunge angle
is equal to 90 degrees. The manufacturing attribute is MFG_MAX_PLNG_ANG.
|
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH (Finishing cutting speed)
Type: Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH (Finishing feedrate per tooth)
Type: Real
Defines the Finishing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_FINISH. |
MFG_AA_FINISH (Axial depth of cut for finish)
Type: Real
Defines the Axial depth of cut for finish of the tool. The
manufacturing attribute is MFG_AA_FINISH. |
MFG_AR_FINISH (Radial depth of cut for finish)
Type: Real
Defines the Radial depth of cut for finish of the tool.
The manufacturing attribute is MFG_AR_FINISH. |
MFG_VC_ROUGH (Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH (Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_ROUGH. |
MFG_AA_ROUGH (Axial depth of cut for rough)
Type: Real
Defines the Axial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AA_ROUGH. |
MFG_AR_ROUGH (Radial depth of cut for rough)
Type: Real
Defines the Radial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AR_ROUGH. |
MfgTSlotterTool (T-Slotter)
Description
Describes the MfgTSlotterTool resource attributes that are available in Machining
workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
MFG_BALL_TYPE (Ball-end tool)
Type: Boolean (Yes/No)
Defines the tool as being ball-end. The manufacturing attribute
is MFG_BALL_TYPE. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_CORNER_RAD (Corner radius : Rc)
Type: Real
Defines the radius of the cutting shape of the tool. The
manufacturing attribute is MFG_CORNER_RAD. |
MFG_CORNER_RAD_2 (Upper corner radius : Rc2)
Type: Real
Defines the upper radius of the cutting shape of the tool.
The manufacturing attribute is MFG_CORNER_RAD_2. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_LENGTH (Length : l)
Type:
Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_COMPOSITION (Composition)
Type: String
Possible values:
ONE_PIECE (One piece)
INSERT_HOLDER (Insert holder)
Specifies if the tool is an inserted one. The manufacturing
attribute is MFG_COMPOSITION with possible value ONE_PIECE
or INSERT_HOLDER. |
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH (Finishing cutting speed)
Type: Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_SZ_FINISH (Finishing feedrate per tooth)
Type: Real
Defines the Finishing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_FINISH. |
MFG_AA_FINISH (Axial depth of cut for finish)
Type: Real
Defines the Axial depth of cut for finish of the tool. The
manufacturing attribute is MFG_AA_FINISH. |
MFG_AR_FINISH (Radial depth of cut for finish)
Type: Real
Defines the Radial depth of cut for finish of the tool.
The manufacturing attribute is MFG_AR_FINISH. |
MFG_VC_ROUGH (Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_SZ_ROUGH (Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_ROUGH. |
MFG_AA_ROUGH (Axial depth of cut for rough)
Type: Real
Defines the Axial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AA_ROUGH. |
MFG_AR_ROUGH (Radial depth of cut for rough)
Type: Real
Defines the Radial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AR_ROUGH. |
MfgBarrelMillTool (Barrel Mill)
Description
Describes the MfgBarrelMillTool resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_CORNER_RAD (Corner radius : Rc)
Type: Real
Defines the radius of the cutting shape of the tool. The
manufacturing attribute is MFG_CORNER_RAD. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_ENTRY_DIAM (Entry diameter : d)
Type: Real
Defines the smallest diameter of the head of the tool. The
manufacturing attribute is MFG_ENTRY_DIAM. |
MFG_RADIAL_DISTANCE (Radial distance : Xce)
Type: Real
Defines the radial distance of the center of the barrel.
The manufacturing attribute is MFG_RADIAL_DISTANCE. |
MFG_VERTICAL_DISTANCE (Vertical distance : Zce)
Type: Real
Defines the vertical distance of the center of the barrel.
The manufacturing attribute is MFG_VERTICAL_DISTANCE.
|
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_NB_OF_FLUTES (Number of flutes)
Type: Integer
Defines the number of flutes on the tool. In case of tools
with separate inserts, this is the number of inserts The
manufacturing attribute is MFG_NB_OF_FLUTES. |
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_COMPOSITION (Composition)
Type: String
Possible values:
ONE_PIECE (One piece)
INSERT_HOLDER (Insert holder)
Specifies if the tool is an inserted one. The manufacturing
attribute is MFG_COMPOSITION with possible value ONE_PIECE
or INSERT_HOLDER. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_PLNG_ANG (Max plunge angle)
Type: Real
Defines the plunge ability of the tool. When the tool is
able to plunge along its axis, the maximum plunge angle
is equal to 90 degrees. The manufacturing attribute is MFG_MAX_PLNG_ANG.
|
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC_FINISH (Finishing cutting speed)
Type: Real
Defines the Finishing cutting speed of the tool. The manufacturing
attribute is MFG_VC_FINISH. |
MFG_VC_FINISH_NEW_SP (Finishing spindle speed)
Type: Real
Defines the Finishing spindle speed of the tool. The manufacturing
attribute is MFG_VC_FINISH_NEW_SP. |
MFG_SZ_FINISH (Finishing feedrate per tooth)
Type: Real
Defines the Finishing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_FINISH. |
MFG_SZ_FINISH_GLOBAL (Finishing feedrate)
Type: Real
Defines the Finishing feedrate of the tool. The manufacturing
attribute is MFG_SZ_FINISH_GLOBAL. |
MFG_AA_FINISH (Axial depth of cut for finish)
Type: Real
Defines the Axial depth of cut for finish of the tool. The
manufacturing attribute is MFG_AA_FINISH. |
MFG_AR_FINISH (Radial depth of cut for finish)
Type: Real
Defines the Radial depth of cut for finish of the tool.
The manufacturing attribute is MFG_AR_FINISH. |
MFG_VC_ROUGH (Roughing cutting speed)
Type: Real
Defines the Roughing cutting speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH. |
MFG_VC_ROUGH_NEW_SP (Roughing spindle speed)
Type: Real
Defines the Roughing spindle speed of the tool. The manufacturing
attribute is MFG_VC_ROUGH_NEW_SP. |
MFG_SZ_ROUGH (Roughing feedrate per tooth)
Type: Real
Defines the Roughing feedrate per tooth of the tool. The
manufacturing attribute is MFG_SZ_ROUGH. |
MFG_SZ_ROUGH_GLOBAL (Roughing feedrate)
Type: Real
Defines the Roughing feedrate of the tool. The manufacturing
attribute is MFG_SZ_ROUGH_GLOBAL. |
MFG_AA_ROUGH (Axial depth of cut for rough)
Type: Real
Defines the Axial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AA_ROUGH. |
MFG_AR_ROUGH (Radial depth of cut for rough)
Type: Real
Defines the Radial depth of cut for rough of the tool. The
manufacturing attribute is MFG_AR_ROUGH. |
Max machining feedrate
Type: Real
Defines the maximum machining feedrate of the tool. This
attribute is mainly used in the NC Manufacturing Verification
product for detecting possible collisions between tool and
stock. |
MfgExternalTool (External Insert Holder)
Description
Describes the MfgExternalTool resource attributes that are available in Machining
workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_HAND_STYLE (Hand style)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
NEUTRAL
Defines the tool's hand style. The manufacturing attribute
is MFG_HAND_STYLE with possible value RIGHT_HAND, LEFT_HAND
or NEUTRAL. |
MFG_HOLDER_CAPAB (Holder capability)
Type: String
Possible values:
SURFACE
TRAVERSE
BOTH (Shortest)
Defines the holder capability. The manufacturing attribute
is MFG_HOLDER_CAPAB with possible value SURFACE, TRAVERSE
or BOTH. |
MFG_KAPPA_R (Cutting edge angle : Kr)
Type: Real
Defines the cutting edge angle of the tool. The manufacturing
attribute is MFG_KAPPA_R. |
MFG_INSERT_ANGLE (Insert angle : a)
Type: Real
Defines the angle of the insert mounted on the tool. The
manufacturing attribute is MFG_INSERT_ANGLE. |
MFG_INSERT_LGTH (Insert length : l)
Type: Real
Defines the cutting edge length of an insert. The manufacturing
attribute is MFG_INSERT_LGTH. |
MFG_CLEAR_ANGLE (Clearance angle)
Type: Real
Defines the clearance angle. The manufacturing attribute
is MFG_CLEAR_ANGLE. |
MFG_SHK_CUT_WDTH (Shank cut width : f)
Type: Real
Defines the cutting width of the tool. The manufacturing
attribute is MFG_SHK_CUT_WDTH. |
MFG_SHANK_HEIGHT (Shank height : h)
Type: Real
Defines the height of the shank. The manufacturing attribute
is MFG_SHANK_HEIGHT. |
MFG_SHK_LENGTH_1 (Shank length 1 : l1)
Type: Real
Defines the overall length of the tool. The manufacturing
attribute is MFG_LENGTH_1. |
MFG_SHK_LENGTH_2 (Shank length 2 : l2)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_SHK_LENGTH_2.
|
MFG_SHANK_WIDTH (Shank width : b)
Type: Real
Defines the width of the shank. The manufacturing attribute
is MFG_SHANK_WIDTH. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
MFG_TRAILING_ANG (Trailing angle)
Type: Real
Defines the trailing angle of the tool. If the trailing
angle is set to 0, insert angle is used for the trailing
angle. The manufacturing attribute is MFG_TRAILING_ANG.
|
MFG_LEADING_ANG (Leading angle)
Type: Real
Defines the leading angle of the tool. If the leading angle
is set to 0, insert angle is used for the leading angle.
The manufacturing attribute is MFG_LEADING_ANG. |
MFG_MAX_REC_DPTH (Max recessing depth)
Type: Real
Defines the maximum recessing depth. The manufacturing attribute
is MFG_MAX_REC_DPTH. |
MfgInternalTool (Internal Insert Holder)
Description
Describes the MfgInternalTool resource attributes that are available in Machining
workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_HAND_STYLE (Hand style)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
NEUTRAL
Defines the tool's hand style. The manufacturing attribute
is MFG_HAND_STYLE with possible value RIGHT_HAND, LEFT_HAND
or NEUTRAL. |
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_KAPPA_R (Cutting edge angle : Kr)
Type: Real
Defines the cutting edge angle of the tool. The manufacturing
attribute is MFG_KAPPA_R. |
MFG_INSERT_ANGLE (Insert angle : a)
Type: Real
Defines the angle of the insert mounted on the tool. The
manufacturing attribute is MFG_INSERT_ANGLE. |
MFG_INSERT_LGTH (Insert length : l)
Type: Real
Defines the cutting edge length of an insert. The manufacturing
attribute is MFG_INSERT_LGTH. |
MFG_CLEAR_ANGLE (Clearance angle)
Type: Real
Defines the clearance angle. The manufacturing attribute
is MFG_CLEAR_ANGLE. |
MFG_BAR_LENGTH_1 (Bar length 1 : l1)
Type: Real
Defines the overall length of the tool. The manufacturing
attribute is MFG_BAR_LENGTH_1. |
MFG_BAR_LENGTH_2 (Bar length 2 : l2)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_BAR_LENGTH_2.
|
MFG_BAR_CUT_RAD (Bar cut radius : f)
Type: Real
Defines the cutting radius of the tool. The manufacturing
attribute is MFG_BAR_CUT_RAD. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
MFG_TRAILING_ANG (Trailing angle)
Type: Real
Defines the trailing angle of the tool. If the trailing
angle is set to 0, insert angle is used for the trailing
angle. The manufacturing attribute is MFG_TRAILING_ANG.
|
MFG_LEADING_ANG (Leading angle)
Type: Real
Defines the leading angle of the tool. If the leading angle
is set to 0, insert angle is used for the leading angle.
The manufacturing attribute is MFG_LEADING_ANG. |
MFG_MAX_REC_DPTH (Max recessing depth)
Type: Real
Defines the maximum recessing depth. The manufacturing attribute
is MFG_MAX_REC_DPTH. |
MFG_MAX_BOR_DPTH (Max boring depth)
Type: Real
Defines the maximum boring depth. The manufacturing attribute
is MFG_MAX_BOR_DPTH. |
MFG_MIN_DIAM (Min diameter)
Type: Real
Defines the minimum diameter which can be cut. The manufacturing
attribute is MFG_MIN_DIAM. |
MfgGrooveExternalTool (External Groove Insert Holder)
Description
Describes the MfgGrooveExternalTool resource attributes that are available
in Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_HAND_STYLE (Hand style)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
NEUTRAL
Defines the tool's hand style. The manufacturing attribute
is MFG_HAND_STYLE with possible value RIGHT_HAND, LEFT_HAND
or NEUTRAL. |
MFG_HAND_ANGLE (Hand angle)
Type: Real
Defines the hand angle. The manufacturing attribute is MFG_HAND_ANGLE.
|
MFG_INSERT_WIDTH (Insert width : la)
Type: Real
Defines the insert width. The manufacturing attribute is
MFG_INSERT_WIDTH. |
MFG_CLEAR_ANGLE (Clearance angle)
Type: Real
Defines the clearance angle. The manufacturing attribute
is MFG_CLEAR_ANGLE. |
MFG_SHK_CUT_WDTH (Shank cut width : f)
Type: Real
Defines the cutting width of the tool. The manufacturing
attribute is MFG_SHK_CUT_WDTH. |
MFG_SHANK_HEIGHT (Shank height : h)
Type: Real
Defines the height of the shank. The manufacturing attribute
is MFG_SHANK_HEIGHT. |
MFG_SHK_LENGTH_1 (Shank length 1 : l1)
Type: Real
Defines the overall length of the tool. The manufacturing
attribute is MFG_LENGTH_1. |
MFG_SHK_LENGTH_2 (Shank length 2 : l2)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_SHK_LENGTH_2.
|
MFG_SHANK_WIDTH (Shank width : b)
Type: Real
Defines the width of the shank. The manufacturing attribute
is MFG_SHANK_WIDTH. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
MFG_MAX_CUT_DPTH (Max cut depth : ar)
Type: Real
Defines the maximum cut depth. The manufacturing attribute
is MFG_MAX_CUT_DPTH. |
MFG_MAX_CUT_WDTH (Max cut width)
Type: Real
Defines the maximum cut width. The manufacturing attribute
is MFG_MAX_CUT_WDTH. |
MFG_GAUGING_ANG (Gouging angle)
Type: Real
Defines the gouging angle. The manufacturing attribute is
MFG_GAUGING_ANG. |
MfgGrooveFrontalTool (Frontal Groove Insert Holder)
Description
Describes the MfgGrooveFrontalTool resource attributes that are available
in Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_HAND_STYLE (Hand style)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
NEUTRAL
Defines the tool's hand style. The manufacturing attribute
is MFG_HAND_STYLE with possible value RIGHT_HAND, LEFT_HAND
or NEUTRAL. |
MFG_INSERT_WIDTH (Insert width : la)
Type: Real
Defines the insert width. The manufacturing attribute is
MFG_INSERT_WIDTH. |
MFG_CLEAR_ANGLE (Clearance angle)
Type: Real
Defines the clearance angle. The manufacturing attribute
is MFG_CLEAR_ANGLE. |
MFG_SHK_CUT_WDTH (Shank cut width : f)
Type: Real
Defines the cutting width of the tool. The manufacturing
attribute is MFG_SHK_CUT_WDTH. |
MFG_SHANK_HEIGHT (Shank height : h)
Type: Real
Defines the height of the shank. The manufacturing attribute
is MFG_SHANK_HEIGHT. |
MFG_SHK_LENGTH_1 (Shank length 1 : l1)
Type: Real
Defines the overall length of the tool. The manufacturing
attribute is MFG_LENGTH_1. |
MFG_SHK_LENGTH_2 (Shank length 2 : l2)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_SHK_LENGTH_2.
|
MFG_SHANK_WIDTH (Shank width : b)
Type: Real
Defines the width of the shank. The manufacturing attribute
is MFG_SHANK_WIDTH. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
MFG_MAX_CUT_DPTH (Max cut depth : ar)
Type: Real
Defines the maximum cut depth. The manufacturing attribute
is MFG_MAX_CUT_DPTH. |
MFG_MAX_CUT_WDTH (Max cut width)
Type: Real
Defines the maximum cut width. The manufacturing attribute
is MFG_MAX_CUT_WDTH. |
MFG_GAUGING_ANG (Gouging angle)
Type: Real
Defines the gouging angle. The manufacturing attribute is
MFG_GAUGING_ANG. |
MFG_MAX_CUT_DIAM
Type: Real
Defines the maximum cut diameter. The manufacturing attribute
is MFG_MAX_CUT_DIAM. |
MFG_MIN_CUT_DIAM
Type: Real
Defines the minimum cut diameter. The manufacturing attribute
is MFG_MIN_CUT_DIAM. |
MfgGrooveInternalTool (Internal Groove Insert Holder)
Description
Describes the MfgGrooveInternalTool resource attributes that are available
in Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_HAND_STYLE (Hand style)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
NEUTRAL
Defines the tool's hand style. The manufacturing attribute
is MFG_HAND_STYLE with possible value RIGHT_HAND, LEFT_HAND
or NEUTRAL. |
MFG_HAND_ANGLE (Hand angle)
Type: Real
Defines the hand angle. The manufacturing attribute is MFG_HAND_ANGLE.
|
MFG_INSERT_WIDTH (Insert width : la)
Type: Real
Defines the insert width. The manufacturing attribute is
MFG_INSERT_WIDTH. |
MFG_CLEAR_ANGLE (Clearance angle)
Type: Real
Defines the clearance angle. The manufacturing attribute
is MFG_CLEAR_ANGLE. |
MFG_BAR_LENGTH_1 (Bar length 1 : l1)
Type: Real
Defines the overall length of the tool. The manufacturing
attribute is MFG_BAR_LENGTH_1. |
MFG_BAR_LENGTH_2 (Bar length 2 : l2)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_BAR_LENGTH_2.
|
MFG_BAR_CUT_RAD (Bar cut radius : f)
Type: Real
Defines the cutting radius of the tool. The manufacturing
attribute is MFG_BAR_CUT_RAD. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
MFG_MAX_CUT_DPTH (Max cut depth : ar)
Type: Real
Defines the maximum cut depth. The manufacturing attribute
is MFG_MAX_CUT_DPTH. |
MFG_MAX_CUT_WDTH (Max cut width)
Type: Real
Defines the maximum cut width. The manufacturing attribute
is MFG_MAX_CUT_WDTH. |
MFG_GAUGING_ANG (Gouging angle)
Type: Real
Defines the gouging angle. The manufacturing attribute is
MFG_GAUGING_ANG. |
MFG_MIN_DIAM (Min diameter)
Type: Real
Defines the minimum diameter which can be cut. The manufacturing
attribute is MFG_MIN_DIAM. |
MfgThreadExternalTool (External Thread Insert Holder)
Description
Describes the MfgThreadExternalTool resource attributes that are available
in Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_HAND_STYLE (Hand style)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
NEUTRAL
Defines the tool's hand style. The manufacturing attribute
is MFG_HAND_STYLE with possible value RIGHT_HAND, LEFT_HAND
or NEUTRAL. |
MFG_INSERT_LGTH (Insert length : l)
Type: Real
Defines the cutting edge length of an insert. The manufacturing
attribute is MFG_INSERT_LGTH. |
MFG_SHK_CUT_WDTH (Shank cut width : f)
Type: Real
Defines the cutting width of the tool. The manufacturing
attribute is MFG_SHK_CUT_WDTH. |
MFG_SHANK_HEIGHT (Shank height : h)
Type: Real
Defines the height of the shank. The manufacturing attribute
is MFG_SHANK_HEIGHT. |
MFG_SHK_LENGTH_1 (Shank length 1 : l1)
Type: Real
Defines the overall length of the tool. The manufacturing
attribute is MFG_LENGTH_1. |
MFG_SHK_LENGTH_2 (Shank length 2 : l2)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_SHK_LENGTH_2.
|
MFG_SHANK_WIDTH (Shank width : b)
Type: Real
Defines the width of the shank. The manufacturing attribute
is MFG_SHANK_WIDTH. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
MfgThreadInternalTool (Internal Thread Insert Holder)
Description
Describes the MfgThreadInternalTool resource attributes that are available
in Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type: String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_HAND_STYLE (Hand style)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
NEUTRAL
Defines the tool's hand style. The manufacturing attribute
is MFG_HAND_STYLE with possible value RIGHT_HAND, LEFT_HAND
or NEUTRAL. |
MFG_INSERT_LGTH (Insert length : l)
Type: Real
Defines the cutting edge length of an insert. The manufacturing
attribute is MFG_INSERT_LGTH. |
MFG_BAR_LENGTH_1 (Bar length 1 : l1)
Type: Real
Defines the overall length of the tool. The manufacturing
attribute is MFG_BAR_LENGTH_1. |
MFG_BAR_LENGTH_2 (Bar length 2 : l2)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_BAR_LENGTH_2.
|
MFG_BAR_CUT_RAD (Bar cut radius : f)
Type: Real
Defines the cutting radius of the tool. The manufacturing
attribute is MFG_BAR_CUT_RAD. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
MFG_MIN_DIAM (Min diameter)
Type: Real
Defines the minimum diameter which can be cut. The manufacturing
attribute is MFG_MIN_DIAM. |
MfgBoringBarTool (Boring Bar)
Description
Describes the MfgBoringBarTool resource attributes that are available in
Machining workbenches.
Base Attributes
These attributes provide general information.
MFG_NAME (Name)
Type:
String
Specifies the name of the resource. |
MFG_COMMENT (Comment)
Type: String
Associates a comment to the resource. |
MFG_TOOL_NUMBER (Tool number)
Type: Integer
Defines the tool number. The manufacturing attribute is
MFG_TOOL_NUMBER. |
Geometry Attributes
These attributes characterize the tool shape and have an impact on the tool
path computation.
MFG_NOMINAL_DIAM (Nominal diameter : D)
Type: Real
Defines the cutting diameter of the tool. The manufacturing
attribute is MFG_NOMINAL_DIAM. |
MFG_OVERALL_LGTH (Overall length : L)
Type: Real
Defines the total length of the tool. The manufacturing
attribute is MFG_OVERALL_LGTH. |
MFG_CUT_LENGTH (Cutting length : Lc)
Type: Real
Defines the effective cutting length available on the tool's
active part. The manufacturing attribute is MFG_CUT_LENGTH.
|
MFG_LENGTH (Length : l)
Type: Real
Defines the length of the external envelope of the tool's
active part. The manufacturing attribute is MFG_LENGTH.
|
MFG_BODY_DIAM (Body diameter : db)
Type: Real
Defines the diameter of the external envelope of the non-active
part of the tool. The manufacturing attribute is MFG_BODY_DIAM.
|
MFG_CUT_ANGLE (Cutting angle : A)
Type: Real
Defines the cutting angle of the tool. The manufacturing
attribute is MFG_CUT_ANGLE. |
MFG_TL_TIP_LGTH (Tool tip length : ld)
Type: Real
Defines the part of the tool that cannot be used for cutting
material at the correct diameter (non-functional part of
the tool). The manufacturing attribute is MFG_TL_TIP_LGTH.
|
MFG_NON_CUT_DIAM (Non cut diameter : dn)
Type: Real
Defines the diameter of the non-cutting extremity of a boring
bar. The manufacturing attribute is MFG_NON_CUT_DIAM.
|
MFG_MIN_DIAMETER (Minimum diameter)
Type: Real
Defines the minimum diameter for an adjustable boring bar.
The manufacturing attribute is MFG_MIN_DIAMETER. |
MFG_MAX_DIAMETER (Maximum diameter)
Type: Real
Defines the maximum diameter for an adjustable boring bar.
The manufacturing attribute is MFG_MAX_DIAMETER. |
MFG_TIP_ANGLE (Tip angle : E)
Type: Real
Defines the tip angle of a boring bar. The manufacturing
attribute is MFG_TIP_ANGLE. |
MFG_TIP_RADIUS (Tip radius : Re)
Type: Real
Defines tip radius of a boring bar. The manufacturing attribute
is MFG_TIP_RADIUS. |
MFG_TIP_LENGTH (Tip length : lt)
Type: Real
Defines the position and the shape of the cutter on a boring
bar. The manufacturing attribute is MFG_TIP_LENGTH. |
MFG_TOOL_ANGLE (Tool angle : B)
Type: Real
Defines the cutter orientation on a boring bar. The manufacturing
attribute is MFG_TOOL_ANGLE. |
Technology Attributes
These attributes provide technological information without any impact on
the tool path computation.
MFG_WAY_OF_ROT (Way of rotation)
Type: String
Possible values:
RIGHT_HAND (Right hand)
LEFT_HAND (Left hand)
Defines the flutes orientation. It should be compatible
with spindle rotation orientation. The manufacturing attribute
is MFG_WAY_OF_ROT with possible value RIGHT_HAND or LEFT_HAND
|
MFG_MACH_QUALITY (Machining quality)
Type: String
Possible values:
ROUGH (Rough)
FINISH (Finish)
EITHER (Either)
Defines the tool's ability to machine in roughing or finishing
mode. The manufacturing attribute is MFG_MACH_QUALITY with
possible value ROUGH, FINISH or EITHER. |
MFG_COMPOSITION (Composition)
Type: String
Possible values:
ONE_PIECE (One piece)
INSERT_HOLDER (Insert holder)
Specifies if the tool is an inserted one. The manufacturing
attribute is MFG_COMPOSITION with possible value ONE_PIECE
or INSERT_HOLDER. |
MFG_TOOTH_MAT (Tooth material)
Type: String
Possible values:
HIGH_SPEED_STEEL (High speed steel)
COATED_HIGH_SPEED_STEEL (Coated high speed steel)
CARBIDE (Carbide)
COATED_CARBIDE (Coated carbide)
OTHER (Other)
Defines the tooth material type. The manufacturing attribute
is MFG_TOOTH_MAT with possible value: HIGH_SPEED_STEEL,
COATED_HIGH_SPEED_STEEL, CARBIDE, COATED_CARBIDE, OTHER.
|
MFG_TOOTH_DES (Tooth description)
Type: String
Allows the user to specify the tooth nature as a comment.
For example, it could be the supplier reference of the insert.
The manufacturing attribute is MFG_TOOTH_DES. |
MFG_TOOTH_MATDES (Tooth material desc.)
Type: String
Allows the user to specify the tooth material by means of
a comment. For example, it could be the ISO designation
for cutting materials or the reference of the coating material.
The manufacturing attribute is MFG_TOOTH_MATDES. |
MFG_BORE_ABILITY (Boring ability)
Type: String
Possible values:
THROUGH
EITHER
Determines whether a boring bar can be used for through
or blind holes according to its tip configuration. It can
take the following values:
- THROUGH: implies cutting angle < 90 degrees and
tool tip length > 0
- EITHER: implies cutting angle > 90 degrees and tool
tip length = 0.
The manufacturing attribute is MFG_BORE_ABILITY.
|
MFG_TL_RAKE_ANG (Axial tool rake angle )
Type: Real
Defines the axial tool rake angle. The manufacturing attribute
is MFG_TL_RAKE_ANG. |
MFG_RADIAL_TL_RAKE_ANG (Radial tool rake angle )
Type: Real
Defines the radial tool rake angle. The manufacturing attribute
is MFG_RADIAL_TL_RAKE_ANG. |
MFG_MAX_MIL_LENGTH (Max machining length)
Type: Real
Specifies the tool life in length units. The manufacturing
attribute is MFG_MAX_MIL_LENGTH. |
MFG_MAX_MIL_TIME (Max life time)
Type: Real
Specifies the tool life in time units. The manufacturing
attribute is MFG_MAX_MIL_TIME. |
MFG_COOLNT_SNTX (Coolant syntax)
Type: String
Specifies the coolant supply syntax. The manufacturing attribute
is MFG_COOLNT_SNTX. |
MFG_WEIGHT_SNTX (Weight syntax)
Type: String
Specifies the tool weight syntax. The manufacturing attribute
is MFG_WEIGHT_SNTX. |
Cutting Conditions Attributes
These attributes are used for feeds and speeds computation on the operation.
MFG_VC (Cutting speed)
Type:
Real
Defines the Cutting speed of the tool. The manufacturing
attribute is MFG_VC. |
MFG_SZ (Feedrate)
Type:
Real
Defines the Feedrate of the tool. The manufacturing attribute
is MFG_SZ. |
MFG_PP (Depth of cut)
Type:
Real
Defines the Depth of cut of the tool. The manufacturing
attribute is MFG_PP. |