Creating/Modifying a Associative View From FTA  

This task shows you how to create an associative view in a 2D layout from a FTA (Functional Tolerancing & Annotations) view, plane or sketch.

You can then invert, reroute or isolate such views.

When working in a FTA context, you can enter the 2D Layout for 3D Design workbench each time you need to print complex drawings.
Then you can print several views in the same sheet, display only relevant data in a view, include a title block, create a drawing etc.

Open the Common_Tolerancing_Annotations_01.CATPart document.
Select Start > Mechanical Design > 2D Layout for 3D Design and create a layout alongside the 3D window.

 
  1. In the 2D window, click New View From in the Layout toolbar (Views sub-toolbar).

    The Tools Palette toolbar is displayed.

    By default, the relevant view type is selected. In this case, the Auxiliary view icon is selected.

  2. Check that the Create Datum option is not activated (you need to create an associative view).

  3. In the 3D window, select Front View.1 from the specification tree.

    The green arrow allows you to invert the normal (N) of the layout view. At creation, you can also select the Invert option from the contextual menu. 

    A new Front View.1 item is added to the 2D layout specification tree.

  4. In the 2D window, click on the sheet at the location where you want the view to be positioned.

    The associative view is created.
    For the purpose of this scenario, you will now re-route this view.

  5. Right-click the view, and select Change View Support from the contextual menu.
    The Change View Support dialog box is displayed.

  6. Select Associative type, then select Front View.2 in the 3D specification tree to fulfill the Reference field.

    • Type: define your view as an isolated or associative one

    • Reference: select or modify a 3D view to be linked with the 2D layout view

    • Invert normal: select this checkbox to inverse the normal (N) of the 2D layout view.

    After creation, you can also invert the normal (N) of the layout view by clicking on the green arrow. Note that this modification is only available provided that a single view is selected.

  7. Click OK.
    There is no need to update: the layout view is re-routed.

    You will now isolate this view.

  8. Right-click the view, and select Change View Support from the contextual menu.
    The Change View Support dialog box is displayed.

  9. Select the Isolated type.

  10. Click OK.
    In the specification tree, a red lightning on the Front View.1 icon indicates the view is no more associative.

 

About views created from FTA

From FTA, you can create only auxiliary views, section views and section cut.

Annotations

To be generated in a "New view from", annotations must fulfill all the following criteria:

  • they must belong to the extracted part
  • they must belong to a view parallel to the extraction plane, whose normal is not opposite to the extraction plane normal
  • must not be in No Show space at view generation or update
  • must not be masked by a filter applied to the 2DL view.
    More precisely:
    • if there is a mask or an equivalent filter: filtered annotations are not generated
    • if there is a display filter: listed annotations are not generated

Associativity

  • The 2D layout views are associative with the 3D FTA views.
  • At creation, by default, the layout view name is the FTA view name. However, this name is not associative.
  • The layout view properties are not associative with the FTA view properties. As for all other layout views, they are customized via Tools > Options > Mechanical Design > 2D Layout for 3D Design.
  • At creation, the 2D Layout view scale is inverse to the FTA view ratio.

Inversion

At creation or at modification, it is possible to invert the normal (N) of all 2DL views, except for projection views (Front, Rear, Left, Right, Top, Bottom and Isometric views).

Reroute

You can reroute to a FTA view:

  • an isolated 2D Layout view
  • a 2D Layout view associative with another FTA view, plane or sketch.

You cannot reroute a projection view (Front, Rear, Left, Right, Top, Bottom and Isometric views).

Mirrored annotations

When editing a layout from FTA, mirrored annotations are displayed in their creation position, (both in the 2D layout views and in the 3D window). This ensures that the FTA annotations are readable in the layout.

Projection plane modification

When a reference view of an associative 2DL view is modified, the drawing views generated from this 2DL view can reflect the projection plane via a simple update, if the Synchronize during update option is selected (via Tools > Options > Mechanical Design > Drafting > View tab.

If this option is not selected, you can also use the Modify Projection Plane command on the selected plane to update the drawing view.

View origin point

When changing the support of a view or creating a view on a given support, the new view origin point is superposed with the support origin point.

Limitations

You can create a 2D Layout view by selecting the sub-elements of an FTA Offset node, but you cannot select the Offset node itself.