Adding Light Protective Coverings  

This task shows you how to add light protective coverings defined using either the Define Protection Product or the Define Protection Part commands in the Electrical Library workbenches and stored in a catalog.

 

The Browse window is integrated to the Light Protective Covering command through the Light Protective Covering dialog box. It lets you select catalogs stored in database when working in ENOVIA context.

Open any document containing at least a geometrical bundle.

  1. In the Electrical Harness Installation workbench, click Light Protective Covering in the Internal Protection toolbar. For information on Tape Parameters, see About Protective Coverings.

    The Light Protective Covering dialog box appears:

  2. Select the catalog then the Protective covering you want to instantiate.

    You can instantiate protective coverings created using both the Define Protection Product and the Define Protection Part commands in the Electrical Library workbenches. However, if you use Define Protection Part, the customization of the reference part is not kept when instantiated.

    1. Open the catalog browser:

      To do so:
       
      1. Click , and navigate to the catalog, for example:
        .../online/cfysm_C2/samples/ElectricalSession/catalog.
      2. Double-click the protective covering.
      The catalog browser closes and the selected protective covering displays in the upper right corner of the primary window.
      If the Enable Sourcing access option is selected in the Tools > Options > Equipment & Systems > Electrical Harness Discipline > Electrical Assembly Design > General tab, the Collaborative Enterprise Sourcing (CES) environment is enabled, and the Sourcing Search dialog box is displayed instead of the Catalog Browser dialog box. 
       
       
       

      For a given part number defined in iXFElec file, there must be one and only one part found after the query on Internal Item Number criteria, else there would be an ambiguity.

    2. An alternative is to use the Catalog Browser from the toolbar, select the protective covering then drag and drop it onto the bundle segment:

      Supports can be added to bundle segments covered with a protective covering. If the support is adaptative, its parameters will be linked to the protective covering outer diameter.

  3. In the specification tree, select one or more bundle segments to be covered with the protective covering.

    • In case of multi-selection, the bundle segments must belong to the same branch.
      You can select normal bundle segments, as long as they are contiguous.
    • Light Protective Covering is a feature of a multi-branchable document, and it covers bundle segments in one branch only.

    The Protective Covering Information is updated in the dialog box, and the protective covering start and end points are displayed in the geometry.

  4. Drag the Start Extremity or End Extremity label to modify the location of the internal protection.

    • The End Extremity here is modified.
    • The protective covering turns to red informing you that it needs to be updated.
    • The protection extremity is editable all along the branch.
    • You can also double-click any one extremity to re-limit the protective covering.
    1. The Define Extremity dialog box appears:

      It lets you define the new position for the extremity from the reference point.
       
    2. Enter 30 mm in the Distance field.
       
    3. Click Invert to invert the position of the protection extremity to the other side of the reference point while maintaining the same distance from the reference point.

  5. The light protective covering is added as a separate feature to the specification tree under the multi-branchable feature:

  • Light Protective Coverings integrate the collapsed geometry behavior (as applicable for external protections).

  • When you instantiate a customized internal protection (consisting of user defined parameters, relations, or rules), these parameters, relations or rules are added to the specification tree (under internal protection node). A view of the specification tree shows these parameters and relations added under the Product1.1 node: